3 days ago

    Beginners Guide To The K40 Laser Engraver

    This is our down and dirty “cheat sheet” covering the in’s and out’s of the K40 Chinese lasers. This is…
    5 days ago

    Odin Is Operational!!!

    So this is the first test after optical alignment. Still using the m2 nano/inkscape/k40whisperer but my next few videos will…
    6 days ago

    Cutting Back The Exhaust Port In A K40 – Project Odin

    This is the procedure I used to cut back the exhaust port in Odin. Check out lasergods.com for more!
    1 week ago

    Drag Chain Head Connection On Odin

    this is to answer a common question posed after the cyclops drag chain video. this shows how the chain is…
    1 week ago

    Project Odin Update

    Started the tube install video and my phone stopped recording about 2/3rd’d of the way through so i will have…
    1 week ago

    RDWorks Learning Lab 148 China Blue Head Transplant Part 2

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    1 week ago

    RDWorks Learning Lab 148 China Blue Head Transplant Part 2

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    1 week ago

    RDWorks Learning Lab 148 China Blue Head Transplant Part 2

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    1 week ago

    RDWorks Learning Lab 147 China Blue Head Transplant Part1

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    1 week ago

    RDWorks Learning Lab 147 China Blue Head Transplant Part1

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    1 week ago

    RDWorks Learning Lab 147 China Blue Head Transplant Part1

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    1 week ago

    Best K40 Laser Upgrades – Upgrading my Laser Engraver Part 3

    Best K40 Laser Upgrades – Upgrading my Laser Engraver Part 3 FacebookTweetPinI am on a mission to make my Chinese…
    1 week ago

    Vector vs. Raster

    There are two main types of image files: Vectors and Rasters. Raster images are more common, such as jpg, gif,…
    1 week ago

    Laser Lenses, Optics, and Focus

    This article covers a bit of laser theory as well as practical application of the optics systems in a typical…
    2 weeks ago

    K40 Laser Info

    2 weeks ago

    Project Odin

    2 weeks ago

    RDWorks Learning Lab 146 If not 1000DPI is 500DPI Achievable

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    2 weeks ago

    RDWorks Learning Lab 146 If not 1000DPI is 500DPI Achievable

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    2 weeks ago

    RDWorks Learning Lab 146 If not 1000DPI is 500DPI Achievable

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    3 weeks ago

    RDWorks Learning Lab 145 The 1000 DPI Mystery Solved

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    3 weeks ago

    RDWorks Learning Lab 145 The 1000 DPI Mystery Solved

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    3 weeks ago

    RDWorks Learning Lab 145 The 1000 DPI Mystery Solved

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    3 weeks ago

    Cohesion3D Mini Origin, Stepper Cable Verification, & Home When Complete

    This video goes over the correct origin settings in LightBurn after installing the C3D Mini. We also cover verifying the…
    4 weeks ago

    Upgrading a Chinese K40 Laser Cutter to USA Brand-Name Quality

    Previously I mentioned my Chinese K40 40w laser and how I was planning some upgrades. This is the first follow…
    4 weeks ago

    1001 Uses For A Laser Engraver- Use #1: Cutting Stencils

    1001 Uses For A Laser Engraver- Use #1: Cutting Stencils Be sure to visit https://techbravo.net/k40 for more info!
    06/18/2018

    RDWorks Learning Lab 144 New laser head

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    06/18/2018

    RDWorks Learning Lab 144 New laser head

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    06/17/2018

    Project Odin Camera Setup

    We are gearing up to begin our video series! Some will be Odin specific and some will not. Visit https://techbravo.net/k40/project-odin/…
    06/15/2018

    Project ODIN Coming Soon!!!

    https://techbravo.net/odin/ I have a stock K40 coming in next week and I will be producing videos and documentation on many…
    06/01/2018

    Setting Custom Bed Size For The Cohesion3d Mini

    If you have a bed size other than 200×300 you can change the config on the MicroSD card supplied with…
    05/28/2018

    Warning for new machine owners – grounding issues

    Warning for new machine owners – grounding issues This is a short warning with information how to solve the issue.…
    05/26/2018

    Troubleshooting a K40 Laser Power System

    Troubleshooting a K40 Laser Power System So Your Laser Won't Fire? The laser power and control system in a K40…
    05/17/2018

    Improved K40 Mirror Mounts Adjustments?

    Improved K40 Mirror Mounts Adjustments? Alternate Mirror Mounts Since I bought my K40 I have been looking for better mirror…
    05/15/2018

    RDWorks Learning Lab 143 Acrylic Fest Myths and Truths Part 1

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    05/15/2018

    RDWorks Learning Lab 143 Acrylic Fest Myths and Truths Part 1

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    05/08/2018

    Upgrading my K40 for quality and abilities!

    My K40 laser is the most humble of its kind, having analog dial and controls, and basic optics. Even so,…
    05/07/2018

    RDWorks Learning Lab 142 Looking for the 0;05mm Dot

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    05/07/2018

    RDWorks Learning Lab 142 Looking for the 0;05mm Dot

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    05/07/2018

    RDWorks Learning Lab 142 Looking for the 0;05mm Dot

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    04/29/2018

    Node Editing, Perforation, and Flood Fill

    A quick demonstration of the new node editing, perforation cutting, and flood fill modes.
    04/25/2018

    IP Camera To Virtual USB Port Solution

    This is an app to use a network camera with LightBurn http://www.ipcamdriver.com/Download
    04/19/2018

    RDWorks Learning Lab 141Testing More dottable materials

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    04/19/2018

    RDWorks Learning Lab 141Testing More dottable materials

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    04/19/2018

    RDWorks Learning Lab 141Testing More dottable materials

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    04/16/2018

    RDWorks Learning Lab 140 I Forgot to Focus on the ELEPHANT in the ROOM Re rendered

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    04/16/2018

    RDWorks Learning Lab 140 I Forgot to Focus on the ELEPHANT in the ROOM Re rendered

    If you own a Chinese laser cutter this little series of videos about me learning how to use the free…
    Close