C3D MiniIn The News

C3D Mini Standard Firmware & Config

Here is a step by step how-to for preparing the Cohesion3D Mini microSD card with the correct firmware and configuration for the standard Smoothie Firmware.


Step 1. Power down the laser and remove the microSD card from the C3D controller

Step 2. Open the microSD card on your computer via microSD card reader/adapter

Step 3. Format the microSD card in the FAT file format

Step 4. Download the default firmware from here:  C3D Standard Firmware

Step 5. Download the standard config file from here:  C3D Standard Config File

Step 6. Copy both files onto the microSD card in the root directory (no folders)

Step 7. Eject the microSD card from your computer and re-insert it into the C3D controller

Step 8. Power up the unit and test. You can use THIS ARTICLE to test it.

The official installation guide can be found here:


Related Articles